![]() Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. ![]() The HD2080T powerful ceramic magnet assembly has been designed to obtain 16KGauss in the gap. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200° C) when compared to Kapton. Sometimes issues do arise and can be caused by rough handling of the package old brittle wiring or failure of a component to survive the rigors of transport. All electronics are tested and any issues are mentioned and stated in all descriptions. It has been designed tomaintain low resonance, lowering the minimum crossover point value at 1.2kHz. a pair of Gauss hf400 hi frequency horn drivers. The HD2080T diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion.įour top plate air ducts have been designed to act as a loading chamber for the diaphragm, implementing mid band distortion and response figures. The HD2080T 2-inch exit high frequency compression driver has been designed for use in high quality installed audio systems, where weight is not the key issue. 18 Sound HD2080T 2" High Frequency Driver
0 Comments
Leave a Reply. |